The Portenta H7 Lite follows the Arduino MKR form factor, but enhanced with the Portenta family 80 pin high-density connector. Program it with high-level languages and AI while performing low-latency operations on its customizable hardware.

SPECIFICATIONS :

• Microcontroller: STM32H747XI dual Cortex-M7+M4 32bit low power Arm MCU
• Secure Element (default) : Microchip ATECC608
• Board Power Supply : 5V
• Supported Battery : Li-Po Single Cell, 3.7V, 700mAh Minimum (integrated charger)
• Circuit Operating Voltage : 3.3V
• Current Consumption : 2.95 μA in Standby mode (Backup SRAM OFF, RTC/LSE ON)
• Timers : 22x timers and watchdogs
• Ethernet PHY : 10 / 100 Mbps (through expansion port only)
• SD Card : Interface for SD Card connector (through expansion port only)
• Operational Temperature : -40 °C to +85 °C
• MKR Headers : Use any of the existing industrial MKR shields on it
• High-density Connectors : Two 80 pin connectors will expose all of the board’s peripherals to other devices
• Camera Interface : 8-bit, up to 80 MHz
• ADC : 3× ADCs with 16-bit max. resolution (up to 36 channels, up to 3.6 MSPS)
• DAC : 2× 12-bit DAC (1 MHz) available, only one is accessible by the user through the external A6 pin
• USB-C : Host / Device, High / Full Speed, Power delivery
• Clock speed:
  M4 core : 240 MHz
  M7 core : 480 MHz
• Width : 25.40 mm
• Length : 66.04 mm