M.2 HAT+
9
People watching this product now!
| Stock | Shipping Method | ETA | Cost | |
 |
Available | Self Pickup | 1 Day | Free |
|---|---|---|---|---|
|
|
Available | Inside UAE | 2 - 3 Days | 22 AED / Free Above 50 AED |
|
|
Available | International | 4 - 7 Days | 180 AED | 49 $ |
|
|
Pre-Order | General | 2 Weeks |
Payment Methods:
Raspberry Pi M.2 HAT+
Published May 2024
Raspberry Pi Ltd
2Raspberry Pi M.2 HAT+ – Raspberry Pi Ltd
Overview
The Raspberry Pi M.2 HAT+ enables you to connect M.2 peripherals such as
NVMe drives and AI accelerators to Raspberry Pi 5’s PCIe 2.0 interface, supporting fast
(up to 500 MB/s) data transfer to and from NVMe drives and other PCIe accessories.
Raspberry Pi 5’s single-lane PCI Express 2.0 interface is exposed on a 16-pin, 0.5mm-
pitch FPC connector; the M.2 HAT+ M Key is a mechanical adapter board that converts
between this connector and a subset of the M.2 standard. It supports devices that
have the M.2 M key edge connector, in the 2230 and 2242 form factors. It is capable of
supplying up to 3A to connected M.2 devices.
The Raspberry Pi M.2 HAT+ conforms to the Raspberry Pi HAT+ speciî´ªcation and is
autodetected by the latest Raspberry Pi software/î´ªrmware. It is supplied with a 16mm
stacking header and threaded spacers, so it can be î´ªtted to a Raspberry Pi 5 with the
Raspberry Pi Active Cooler in place.
3Raspberry Pi M.2 HAT+ – Raspberry Pi Ltd
Speciî´ªcation
Features: • Supports single-lane PCIe 2.0 interface
(500 MB/s peak transfer rate)
• Supports devices that use the M.2 M key edge connector
• Supports devices with the 2230 or 2242 form factor
• Capable of supplying up to 3A to connected M.2 devices
• Includes power and activity LEDs
• Conforms to the Raspberry Pi HAT+ specication
• Supplied with ribbon cable, 16mm stacking header, threaded
spacers and screws, and knurled double-î´«anged screw to
secure and support the M.2 peripheral
Operating temperature: 0℃ to 50℃ (ambient)
Production lifetime: The Raspberry Pi M.2 HAT+ will remain in production until at
least January 2032
Compliance: For a full list of local and regional product approvals, please
visit pip.raspberrypi.com
Physical speciî´ªcation
47.5 7.510
49
16.5
56.5
17.5
21
3.5
3.5
18
65
58
29
5
2.55
14.5
16.5
Note:
All dimensions in mm
All dimensions are approximate and for
reference purposes only. The dimensions
shown should not be used for producing
production data
The dimensions are subject to part and
manufacturing tolerances
Dimensions may be subject to change
4Raspberry Pi M.2 HAT+ – Raspberry Pi Ltd
WARNINGS
• This product shall only be connected to a Raspberry Pi via the PCIe interface.
• Any external power supply used with the Raspberry Pi M.2 HAT+ shall comply with relevant regulations and standards
applicable in the country of intended use.
• This product should be operated in a well-ventilated environment, and if used inside a case, the case should not be
covered.
• Whilst in use, this product should be rmly secured, and should not be contacted by conductive items.
• The connection of incompatible devices to the Raspberry Pi M.2 HAT+ may affect compliance, result in damage to the
unit, and invalidate the warranty.
• The connection of incompatible devices to the PCIe interface of a Raspberry Pi computer may affect compliance and
result in damage to the unit and invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of use and be marked
accordingly to ensure that safety and performance requirements are met.
• The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant
safety requirements are met.
• Operation of this device requires adult supervision.
SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product, please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; Raspberry Pi computers and the Raspberry Pi M.2 HAT+ are designed for
reliable operation at normal ambient temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
• Whilst it is powered, avoid handling the printed circuit board, or only handle it by the corners to minimise the risk of
electrostatic discharge damage.
Raspberry Pi M.2 HAT+ – Raspberry Pi Ltd 5
Raspberry Pi is a trademark of Raspberry Pi Ltd
Related Products
Programmable Power Source (AC to AC) (ETA 2-3 Weeks) (OPTION 2) [cheaper with higher power rating of 3000VA]
In stock
AED 11,200.00
SKU:
TSTAPS-7300
Reviews
There are no reviews yet.