SC0873, Raspberry Pi Camera Module 3 NoIR

● Raspberry Pi Camera Module 3 NoIR ■ The Raspberry Pi Camera Module 3 NoIR is the latest entry in the Official Raspberry Pi range of camera modules, offering a new 12 Megapixel Sony IMX708 image sensor, powered autofocus, improved low-light sensitivity, and HDR (High Dynamic Range) support for your Raspberry Pi projects!

● Compatibility ■ To use this camera with a Raspberry Pi 5, you will need to buy an adapter cable! ■ To use this camera with a Raspberry Pi Zero, you will need to buy this adapter cable! ■ This NoIR version is infrared-sensitive with no InfraRed (NoIR) filter on the lens, making it perfect for shooting Infrared photography and taking pictures/video in low light (twilight) environments. For night photography, you'll need to flood the target with infrared light.

● Lens Options ■ The new Camera Module 3 is available with a standard 75° or wide-angle 120° lens (select version before adding to cart), giving you more options for your specific project needs. ■ A standard version is also available, which is better suited for daylight photography.

● Image and Video Capabilities ■ The module is capable of 4608x2592 pixel images and 4608x2592 @14 FPS/2304x1296 @56 FPS/1536x864 @120FPS video. ■ When HDR is enabled, the resolution is limited to 2304x1296 @ 30 FPS.

● Compatibility (Important!) ■ Accessories ■ The Camera Module 3 is mechanically identical to the previous Camera Module V2 apart from the front sensor section. The new sensor is larger and may not fit all previous camera accessories. ■ We are in the process of updating each camera accessory in the store to indicate compatibility within the product descriptions. ■ Software ■ The Camera Module 3 can only be used with libcamera - the previous raspistill/raspivid libraries will not work. ■ You will need to update Raspberry Pi OS as the Camera Module 3 requires a new driver and a specific version of libcamera. ■ Boards ■ The Camera Module 3 is compatible with all Raspberry Pi boards with a full-size camera connector (CSI connector). ■ To use this camera with a Raspberry Pi 5 (which has a smaller CSI connector), you will need to use a Raspberry Pi 5 camera adapter cable. ■ To use this camera with a Raspberry Pi Zero (which has a smaller CSI connector), you will need to use an adapter cable.

● Features ■ Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708) ■ High signal-to-noise ratio (SNR) ■ Built-in 2D Dynamic Defect Pixel Correction (DPC) ■ Phase Detection Autofocus (PDAF) for rapid autofocus ■ QBC Re-mosaic function ■ HDR mode (up to 3-megapixel output) ■ CSI-2 serial data output ■ 2-wire serial communication (supports I2C fast mode and fast-mode plus) ■ 2-wire serial control of the focus mechanism

● Specifications ■ Sensor: Sony IMX708 ■ Resolution: 11.9 megapixels ■ Sensor size: 7.4mm sensor diagonal ■ Pixel size: 1.4μm × 1.4μm ■ Horizontal/vertical: 4608 × 2592 pixels ■ Common video modes: 1080p50, 720p100, 480p120 ■ Output: RAW10 ■ IR cut filter: Not present (NoIR) ■ Autofocus system: Phase Detection Autofocus ■ Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants) ■ Ribbon cable length: 150mm ■ Cable connector: 15 × 1mm FPC

● Lens Specifications ■ Standard ■ Effective focal length: 4.74mm ■ f/1.8 ■ Diagonal field of view: 75 degrees (at 16:9) ■ 35mm equivalent focal length roughly 28mm (full width) - 30mm (3:2 crop) ■ Focus: 10cm - infinity ■ Wide ■ Effective focal length: 2.75mm ■ f/2.2 ■ Diagonal field of view: 120 degrees (at 16:9) ■ 35mm equivalent focal length roughly 16mm (full width) - 18mm (3:2 crop) ■ Focus: 5cm - infinity