The proximity switch is a device designed for sensing the presence of objects near it. It features a threaded barrel with a size of M30 x 1.5 and is made of chrome-plated brass. It has a DC 2-wire output with a nominal voltage of 8.2 VDC and is capable of outputting according to the NAMUR standard (DIN EN 60947-5-6). The switch is connected via a cable and is approved for use in hazardous environments with ATEX category II 1G and II 1D certifications for Ex zones 0 and 20 respectively. It also has SIL2 (Low Demand Mode) and SIL3 (All Demand Mode) certifications according to IEC 61508 and ISO 13849-1 with redundant configuration HFT1.

Features:

Threaded barrel with size M30 x 1.5
Made of chrome-plated brass
DC 2-wire output, nominal voltage of 8.2 VDC
NAMUR standard (DIN EN 60947-5-6) output
Cable connection
ATEX category II 1G, Ex zone 0 and ATEX category II 1D, Ex zone 20 approvals
SIL2 (Low Demand Mode) and SIL3 (All Demand Mode) certifications
Non-flush mounting conditions
Switching frequency of 0.20 kHz
Cable length of 2.0 m
Housing material: metal, CuZn, chrome-plated
Ambient temperature range of -25 to 70 °C
IP67 protection class
Approvals: ATEX II 1G, ATEX II 2G, ATEX II 3G, ATEX II 1D, ATEX II 2D, ATEX II 3D, SIL2, PLc