Description :

-ESP32-C3 Mini Development Board is based on the ESP32-C3-MINI-1 module
-This board provides complete Wi-Fi and Bluetooth LE functions
-I/O pins are broken out to headers on both sides for easy interfacing
-Developers can connect peripherals using jumper wires or mount it on a breadboard.

-Specifications:

1-Wi­Fi
•IEEE 802.11 b/g/n-compliant
•Supports 20 MHz, 40 MHz bandwidth in 2.4GHz band
•1T1R mode with data rate up to 150 Mbps
•Wi-Fi Multimedia (WMM)
•TX/RX A-MPDU, TX/RX A-MSDU
•Immediate Block ACK
•Fragmentation and defragmentation
•Transmit opportunity (TXOP)
•Automatic Beacon monitoring (hardware TSF)
•4 × virtual Wi-Fi interfaces
2-Simultaneous support for Infrastructure BSS in Station mode, SoftAP mode, Station SoftAP mode, and promiscuous mode. Note that when ESP32-C3 family scans in Station mode, the SoftAP channel will change along with the Station channel
•Antenna diversity
•802.11mc FTM
3-Bluetooth
•Bluetooth LE: Bluetooth 5, Bluetooth mesh
•Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
•Advertising extensions
•Multiple advertisement sets
•Channel selection algorithm #2
4-CPU and Memory
•32-bit RISC-V single-core processor, up to 160MHz
•384 KB ROM
•400 KB SRAM (16 KB for cache)
•8 KB SRAM in RTC
•Embedded flash (see details in Chapter 1 Family Member Comparison)
•SPI, Dual SPI, Quad SPI, and QPI interfaces that allow connection to multiple external flash
5-Advanced Peripheral Interfaces
•22 × programmable GPIOs
•Digital interfaces:
○3 × SPI
○2 × UART
○1 × I2C
○1 × I2S
○Remote control peripheral, with 2 transmit channels and 2 receive channels
○LED PWM controller, with up to 6 channels
○Full-speed USB Serial/JTAG controller
○General DMA controller (GDMA), with 3 transmit channels and 3 receive channels
○1 × TWAI controller (compatible with ISO 11898-1)
•Analog interfaces:
○2 × 12-bit SAR ADCs, up to 6 channels
○1 × temperature sensor
•Timers:
○2 × 54-bit general-purpose timers
○3 × watchdog timers
○1 × 52-bit system timer Low Power Management
•Power Management Unit with four power modes Security
•Secure boot
•Flash encryption • 4096-bit OTP, up to 1792 bits for users • Cryptographic hardware acceleration: – AES-128/256 (FIPS PUB 197)