DESCRIPTION:
• Have you run out of I/O pins? This great module allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575 is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.
• On board 3.3V level converter circuit, if you donot solder VCC-VDD pad, the PCF8575 level is 3.3V. If you solder it, the level will be the same with VCC.
Features:
• for Arduino available library: PCF8575
• Working voltage: 2.5 - 5.5VDC
• Working current: 100mA(MAX)
• I2C address: 0x20(default),can be modified by soldering A1 and A2 selection pads.
• 16 individually addressable pins.
• Each pin configurable for input or output.
• Open-drain interrupt output pin for input change interrupt.
• Great for Arduino UNO R3 and other MCU to control simple relay, buzzer, button, led.
specifications:
• Supply voltage: 2.5 - 5.5V DC
• Signal voltage: 2.5 - 5.5V (same as supply voltage)
• GPIO voltage: 2.5 - 5.5V (same as supply voltage)
• Maximum GPIO input current (sink): 25mA
• Maximum GPIO output current (source): 1mA
• Maximum GPIO output current combined (sink source): 100mA
• Number of extra IO pins: 16
• Chip: PCF8575
• Communication:
- Interface: I2C
- Default address: 0x20 (can be changed with A1 and A2 solder pads)
• Dimensions PCB: 33 x 21mm