Description:

This Mach3 USB Controller will run Mach3 through a standard USB port on a PC. You can use Windows 10 and older Windows version 32-bit or 64-bit.

Features:

• Support for 4-axis linkage, you can connect four stepper
• motor drives or servo drives;
• Maximum step-pulse frequency is 100KHz,which is
• suitable for the servo or stepper motor;
• General-purpose opto-couplers isolation input: for
• connecting limit switches, emergency stop switch, auto tool
• zero, home switch, and etc.
• Support for connecting an electronic hand-wheel;
• Has 0-10V signal output , you can use mach3 software to
• control the spindle motor speed.
• General-purpose isolated relay drive output interface, can
• drive four relays for controlling spindle start, forward and
• reverse rotation, pumps, or other devices.
• On-board status LED, indicate connection status and
  operation.