Description:

• For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this sensor, the resistor is actually a small strip of Platinum with a resistance of 1000 ohms at 0°C, thus the name PT1000. Compared to most NTC/PTC thermistors, the PT type of RTD is much most stable and precise (but also more expensive) PT1000s have been used to measure temperature in laboratory and industrial processes, and have developed a reputation for accuracy (better than thermocouples), repeatability, and stability.
• This high-temperature PT100 sensor is equipped with a stainless steel shield that is good from -50°C to 280°C.
PT1000 features:
• Based on resistance measurement principles
• Resistor material is Platinum with a value of 1000 ohm at a temperature 0°C
• Platinum has a positive resistance temperature factor; resistance increases with rising temperature
• Resistance variation is a function of temperature: 3.85Ω/°C nominal
• High accuracy and stability compared to thermocouples, silicon-based temperature sensors, or thermistors
Cable specs:
• 316L Stainless steel capsule: 4mm diameter by ~30mm long (size of stainless steel capsule may vary!)
• Cable is approx 1m / 100cm long
• diameter is 2.8mm
• 26 AWG 7/0.15mm stranded
• Contains PT1000 temperature sensor
• Three wires with terminal prong ends