Description :

This solar panel charger is a lightweight, ultra-thin (2mm), and affordable power solution. This panel comes with a 5V USB connection port. The panel is capable of 10 watts in the open sun with a peak power output of around 6V at 1700mA.

This panel features a monocrystalline silicon material to provide a 20% high photoelectric conversion rate. A frosted surface makes the panel scratch resistant and more durable. This also has a water-resistant epoxy resin seal. The panel is slightly flexible making it considerably lighter than equivalent glass-based panels. Because it is lightweight this panel is designed for temporary installation on windows (that's what the included suction cups are for) but can be permanently installed. If you're considering permanent installation, note that the DC buck on the back of the panel is not fully waterproof. As long as the panel is mounted with the connector pointed down the panel should survive quite well outdoors.

Includes:

•1x Solar Charger
•2x Carabiners
•4x Suction Feet (useful for mounting to windows)

Specifications:

•Solar Output: 6V, 1700mA
•Output: USB 5V, 1200mA
•Water resistance: IP65
•Material: Monocrystalline Silicon
•Test Output using variable load vs. measure voltage:Load / Measured Voltage
○No Load / 5.15V
○100mA / 5.12V
○200mA / 5.09V
○300mA / 5.06V
○400mA / 5.03V
○500mA / 5.00V
○600mA / 4.94V
○700mA / 4.91V
○800mA / 3.13V
○900mA / 2.72V
○1000mA / 2.33V
•Dimensions: 259.60mm x 139.69mm x 2.46mm (9.83mm thickness at USB port)
•Weight: 3.3648 ounces.