HS-200-HV Mauch-076 HS Sensor

• 200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
• The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
• This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
• The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry... etc.
• Connected to the sensor are 2x10cm AWG10 wire (red) as a standard.
• The board comes with 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC.
• If you need a customized cable in different length, then please order it separately.