Description :
- The SyRen motor driver is versatile, efficient, and easy to use for medium powered robots
- Can supply a single DC brushed motor with up to 10A continuously, with peak currents of 15A achievable for a few seconds
- Features overcurrent and thermal protection
- Can be controlled with analog voltage, radio control, serial, and packetized serial
- Can work in tandem with built-in mixing when two SyRens are used
- Operating mode is set with onboard DIP switches
- Has screw terminal connectors for easy building without soldering
- Features synchronous regenerative technology, allowing for battery recharge when slowing down or reversing
- Built-in 5V BEC for powering microcontroller or R/C receiver
- Lithium cutoff mode allows for safe operation with lithium ion and lithium polymer battery packs
- Transistors are switched at ultrasonic speeds (32kHz) for quiet operation
- Not recommended to use with cheap AC adapters, use a battery or DC supply in parallel.
-Applications:
ā¢Combat robots up to 30lb
ā¢Normal and hobby robots up to 100lb
ā¢Differential drive robots
ā¢Electric vehicles, ride-on toys, scooters
ā¢Easy speed/direction control for pumps, conveyors, automation and any application that uses a brushed ā¢DC motor
-Specifications:
ā¢Up to 18V in: 10A continuous, 15A peak
ā¢24V in: 8A continuous, 10A continuous with additional heatsinking/airflow, 15A peak
ā¢Synchronous regenerative drive
ā¢Ultra-sonic switching frequency
ā¢Thermal and overcurrent protection
ā¢Lithium protection mode
ā¢Input modes: Analog, R/C, simplified serial, packetized serial
ā¢Size: 35 x 57 x 14 mm (1.38 x 2.24 x 0.55")