Description :

- With this smart arduino digital servo shield and Dynamixel AX series servos, It's quite easy for you to drive multi servos with daisy chain connection with an Arduino board such as Arduino Uno, and build your robotic dog, hexapod with powerful servos. - This shield Integrates a half duplex circuit inside.That means the transmit wire from UART is connected to all of the AX-12 servos. If a command sends over the wire without servo ID, all of the servos will receive the command, and if the message contains the destination servo ID then only one servo, matching that ID number, will receive it. - Because the servo can be linked by serial bus, which can link up to 200 servos. Each unit can feedback its position, rotation velocity, torque, current, motor temperature and so on.It can rotate all round, and the velocity can be controlled, just act as a gear motor. This feature enables it to work as a motor of wheeled robots, or tracked robots. - Note: The new batch servo AX-12 requires a default reset before altering the working method. You can see it was written in the sample sketch.

- Applications:

•Education •Robot Arm •Humanoid Robot •Hexapod Robot •Any other servo driven application - Specifications: •MCU:Atmega8 •Power Supply:6.5-12V •Arduino Uno R3 layout format •Supporting Dynamixel AX series servos •SPI interface (Digital 10,11,12,13) •Friendly using for the primary user •UART interface for deeper development •7 channels for servo connecting •A half duplex circuit inside •Board surface:Immersion Gold •Size: 59x53mm (2.32x2.09")