TDA7000 FM Receiver; DIP-18

SKU: 20193420


"Shipping: 3-6 days"

In stock


About TDA7000 FM Receiver / TV Tuner

This simple one chip FM receiver / TV tuner will allow you to receive frequencies from 70 up to 120MHz. With this small receiver it is possible to pickup TV stations, entire 88 - 108MHz FM band, aircraft conversation and many other private transmissions. It is a perfect companion to any FM Transmitter especially if FM band in your area is very crowded. TDA7000 receiver offers very good sensitivity therefore it will even allow you to pickup weaker signals that cannot be heard on conventional FM receivers.

A neat feature of presented TDA7000 FM receiver is a voltage controlled oscillator similar to TV tuners that are used in television sets. Frequency is tuned by varying the input voltage to the oscillator. The advantage of this type of oscillator is that you can use regular 100K potentiometer to precisely tune to a given broadcast. Tuning can be performed much quicker and precisely than by using a trimmer (variable capacitor). Trimmers will also shift the frequency as you touch them where potentiometer will not. Trimmer also needs to be placed on receiver's PCB to minimize the stray capacitance where potentiometer can be conveniently placed anywhere you want because it will not be affected by any external capacitance.

Audio Output

TDA7000's audio output signal is only around 70mV which might be enough for driving crystal earphones or high impedance headphones. For higher power audio signal you can easily connect audio amplifier built around LM386 or just about any amplifier chip that will suit your taste.

Reception of stereo audio signal is possible by connecting an external stereo decoder circuit (LM1310) to audio output.

Frequency Selection

Frequency selection is very straight forward. Use L1 variable coil to tune to the lower or upper frequencies that you want to receive and then use just 100K potentiometer to fine tune to any specific frequency. Potentiometer doesn't have to be mounted on the PCB. You can conveniently mount it on enclosure and use leads to connect it to the PCB. If you intend to use TDA7000 as regular 88 - 108MHz FM receiver the recommended voltage supply is 4.5 - 5V.

Payment & Security

Apple Pay Mada Mastercard Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed