Description
INTRODUCTION
This waterproof temperature sensor kit useط¢آ DS18B20ط¢آ probe AS . It contains a probe with aط¢آ resistor module. So it is easy to connect on theط¢آ Arduino board.ط¢آ
The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.ط¢آ
The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.ط¢آ
Checkط¢آ 27 Pcs Sensor Kit for Arduinoط¢آ to get moreط¢آ sensors for arduino.
ESP32 Bluetooth(BLE) Temperature Sensor
SPECIFICATION
- Operating voltage: 3.0~ 5.5V
- ط¢آ±0.5ط¢آ°C Accuracy from -10ط¢آ°C to +85ط¢آ°C
- Usable temperature range: -55 to 125ط¢آ°C (-67ط¢آ°F to +257ط¢آ°F)
- 9 to 12 bit selectable resolution
- Uses 1-Wire interface- requires only one digital pin for communication
- Unique 64 bit ID burned into chip
- Multiple sensors can share one pin
- Temperature-limit alarm system
- Query time is less than 750ms
- 3 wires interface:
-
Type A
- Red wire - VCC
- Black wire - GND
- Yellow wire - DATA
-
Type Bط¢آ
- Red wire - VCC
- Yellow wire - GND
- Green wire - DATA
-
Type A
- Stainless steel tube 6mm diameter by 35mm(1.34") long
- Cable diameter: 4mm(0.16")
- Length: 90cm(35.43")
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.